Lantronix SLC 8000 Advanced Console Manager User Guide - Page 54

4: Quick Setup Table 4-4 Front Panel Setup Options with Associated Parameters Up/ Down Arrow Current Time User ID & Current Time Eth1 Network Settings Eth1 IP Address Eth1 Subnet Mask Eth2 IP Address Left/Right Arrow Console Port Settings Date / Time Settings Baud Rate, Data Bits, Stop Bits, Parity, Flow Control Time Zone Data Bits Date/Time Release Firmware version and date code (display only) Restore Factory Defaults Serial Number Serial Number (display only) ID Device ID (display only) Eth2 Subnet Mask Gateway DNS1 DNS2 DNS3 Stop Bits Parity Flow Control Table 4-5 Front Panel Setup Options, continued Internal Temperature Reading in Celsius & Fahrenheit User Strings Displays configured user string(s), if any. Location Device Ports Indicates the Rack (RK), Row (RW), & Cluster (CW) locations. Detects the connection state of each port: 0=No DSR input signal detected on device port 1=DSR input signal detected on device port Note: The individual screens listed from left to right in Table 4-4 and Table 4-5 can be enabled or disabled for display on the SLC LCD screen. The order of appearance of the screens, if enabled, along with the elected "Home Page" may vary on the LCD screen according to configuration. The internal temperature, user strings, location and device ports LCD menus are disabled by default. See LCD/Keypad on page 348 for instructions on enabling and disabling screens. SLC™ 8000 Advanced Console Manager User Guide 54