Lantronix SLC 8000 Advanced Console Manager User Guide - Page 43

3: Installation To connect a terminal: 1. Attach the Lantronix adapter to your terminal (typically a PN 200.2066A adapter - see Figure B-1) or your PC's serial port (use PN 200. adapter - see Figure B-4). 2. Connect the Cat 5 cable to the adapter, and connect the other end to the SLC console port. 3. Turn on the terminal or start your computer's communication program (e.g., PuTTY or TeraTerm Pro). 4. Once the SLC 8000 advanced console manager is running, press Enter to establish connection. You should see the model name and a login prompt on your terminal. 5. On a factory default SLC you may log in using sysadmin as the user name and the last 8 characters of the Device ID (for newly manufactured units that come installed with 8.3.0.0 or later) or PASS (for all older units) as the password. AC Input The power supply module for the SLC controller accepts AC input voltage of 100-240 VAC, 50/60 HZ. Rear-mounted IEC-type AC power connectors are provided for universal AC power input. (See What's in the Box on page 35.) Warning: Risk of serious electric shock! Disconnect all power cords before servicing the SLC. Figure 3-9 AC Power Input SLC™ 8000 Advanced Console Manager User Guide 43