Marantz SR6004 SR6004 / SR5004 User Manual - English - Page 35

ENGLISH CONNECTIONS FUNCTIONS NAMES AND BASIC OPERATION ADVANCED CONNECTIONS 3 SURROUND SETUP This menu is for setting surround effect parameters for the various surround input signals so as to bring out the live audio effect of your speaker system. 1. Select "Surround Setup" from the Main Menu with the 3 or 4 cursor buttons and press the ENTER button. 2. Select the desired menu with the 3 or 4 cursor buttons and press the ENTER button. • Channel level: "3-1 CHANNEL LEVEL" (see page 33) • PLIIx Music Parameter: "3-2 PLIIx MUSIC PARAMETER" (see page 34) • CSII Parameter: "3-3 CSII PARAMETER" (see page 34) • NEO:6 Parameter: "3-4 NEO:6 PARAMETER" (see page 34) • HT-EQ: Select to active the HT-EQ with the 1 or 2 cursor buttons. The total balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments. Activating the HT-EQ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance. The HT-EQ feature is available except in the following modes. • 7.1 CH INPUT • PURE DIRECT • SOURCE DIRECT • Dolby Head Phone • When VIRTUAL is set for the surround mode • LFE Level: Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select "0dB", "-10 dB" or "OFF" with the 1 or 2 cursor button. • M-DAX: Select the desired M-DAX mode. Select "High", "Low" or "Off" with the 1 or 2 cursor button. (See page 41) After you complete this portion of the setup, move the cursor to "Return" with the 3, 4 cursor buttons and press the ENTER button. Surround Setup Channel Level PL x Music Parameter CS Parameter NEO: 6 Parameter HT-EQ LFE Level M-DAX Return : Off : 0dB : Off : Up / Down : Enter : Select Exit : Exit ☞ P. 33 Channel Level Surround Mode Front Height Left Center Front Height Right Surround Right Surround Back Right Surround Back Left Surround Left Subwoofer Return : Auto : 0.0dB : 0.0dB : 0.0dB : 0.0dB : 0.0dB : 0.0dB : 0.0dB : 0.0dB : Up / Down : Change Enter : ☞ P. 34 PL x Music Parameter ParameterCenter Panorama Dimension Center Width Return : Default : Off : 0 : 3 Exit : Exit : Up / Down : Change Enter : Exit : Exit ☞ P. 34 CS Parameter TrubassCenter : 0 SRS Dialog : 0 Return : Up / Down : Change Enter : ☞ P. 34 NEO: 6 Parameter Center Gain : 0.3 Return Exit : Exit : Up / Down : Change Enter : Exit : Exit 3-1 CHANNEL LEVEL 1. Select "Surround Setup" from Main Menu with 3 or 4 cursor buttons and press the ENTER button. 2. Select "Channel Level" with the 3 or 4 cursor buttons and press the ENTER button. 3. Set the Surround Mode with the 1 or 2 cursor buttons. Channel Level Surround Mode Front Height Left Center Front Height Right Surround Right Surround Back Right Surround Back Left Surround Left Subwoofer : Auto : 0.0dB : 0.0dB : 0.0dB : 0.0dB : 0.0dB : 0.0dB : 0.0dB : 0.0dB Return : Up / Down : Change Enter : Exit : Exit 4. Select the desired menu item with the 3 or 4 cursor buttons, set the desired level with the 1 or 2 cursor buttons, and press the ENTER button. Surround Mode: The surround mode can be independently set for 3 modes. 1. Multi Ch STEREO 2. CSII 3. Others CHANNEL LEVEL Center: Set the effect level of the center speaker between -12 and +12 level in 0.5 level interval . • If "None" was selected for the center speaker setting in the Speaker Size, then this setting will not appear. Surround Left or Right: Set the effect level of the Surround speaker between -12 and +12 level in 0.5 level interval . • If "None" was selected for the surround speakers setting in the Speaker Size, then this setting will not appear. SETUP Surround Back Left or Right: Set the effect level of the Surround Back speaker between -12 and +12 level in 0.5 level interval . • If "None" was selected for the surround back speakers setting in the Speaker Size, then this setting will not appear. Front Height Left or Right: Set the effect level of the front height speaker between -12 and +12 level in 0.5 level interval . • If "None" was selected for the front height speakers setting in the Speaker Size, then this setting will not appear. Subwoofer: Set the effect level of the subwoofer speaker between -18 and +12 level in 0.5 level interval . • If "No" was selected for the subwoofer speaker setting in the Speaker Size, then this setting will not appear. Note • Setting to a mode other than multichannel stereo or CSII will affect the speaker level as explained in "2-2 MANUAL SETUP". After you complete this portion of the setup, move the cursor to "Return" with the 3 or 4 cursor buttons and press the ENTER button to go to the Surround Setup menu. 33 BASIC SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS