Marantz SR6004 SR6004 / SR5004 User Manual - English - Page 38

ENGLISH NAMES AND FUNCTIONS CONNECTIONS BASIC OPERATION ADVANCED CONNECTIONS BASIC SETUP 5 PREFERENCE 1. Select "Preference" from Main Menu with the 3 or 4 cursor buttons and press the ENTER button. 2. Select the desired menu with the 3 or 4 cursor buttons and press the ENTER button. • Zone A Setup : "5-1 ZONE SETUP" (see page 36) • Zone B Setup : "5-1 ZONE SETUP" (see page 36) • DC Trigger Setup : "5-2 DC TRIGGER SETUP" (see page 37) • Optical: Select when using equipment with optical digital output. Rec: Select when recording to a CD recorder or MD recorder. (See page 12) Zone B: Select when using ZONE B. (See pages 21, 65) • Standby Mode: When this is set to "Economy", you can reduce the power consumption when the unit is in the Standby mode. When "Economy" is selected, "RS-232C" is disabled when the unit is in the Standby mode. • Audio: In the Audio mode, Dolby Digital and DTS output is set to either "Main" or "Sub". Select "Audio" with the 1 or 2 cursor buttons, then select Main ↔ Sub ↔ Main+Sub with the 1 or 2 cursor buttons. • HDMI Audio: This setting determines whether to play back audio input to the HDMI jacks through the unit or output it through the unit to a TV or projector. Enable: The audio input to the HDMI jacks can be played back by this unit. In such case, audio signals are not output to the TV or projector. Through: The audio input to the HDMI jacks is not output from the speaker terminals of the unit. Audio data is output directly to the TV or projector. This setting is used to listen to audio on a multi channel TV, etc. 36 • HDMI Lip Sync: Video signals may take longer to process than audio signals depending on the connected video equipment. When the unit is connected to TV or Projector supporting Auto Lipsync Correction in HDMI 1.3a, audio and video can be automatically synchronized using this function. Use the 1 or 2 cursor buttons to switch between Enable and Disable. Enable: Auto Lipsync Correction is used to synchronize audio and video. Disable: Deactivates this function. Notes • This function is not available when the unit is connected to equipment that does not support HDMI 1.3a or Auto Lipsync Correction. For details, check the userʼs manual of the connected equipment. • If this function is unavailable, you can use the regular Lipsync function to synchronize audio and video. (See page 43) After you complete this portion of the setup, move the cursor to "Return" with the 3 or 4 cursor buttons and press the ENTER button. Preference Zone A Setup Zone B Setup DC Trigger Setup Optical Standby Mode Audio HDMI Audio HDMI Lip Sync Return : Up / Down : : Rec : Normal : Main : Enable : Disable Enter : Select Exit : Exit Zone A Setup Audio Source Sleep Timer Stereo / Mono. Zone Pre Out Volume Mode Level Zone Speaker Out Volume Mode Level Return : Up / Down : Change : BLU-RAY : Off : Stereo : Off : Variable : -90dB Enter : Exit : Exit Zone B Setup Audio Source Sleep Timer Zone Digital Out Return : BLU-RAY (Dig.-) : Off : Off : Up / Down : Change Enter : Exit : Exit DC Trigger Setup TriggerSystem Error!! BLU-RAY DVD VCR DSS TV CD/CDR 7.1ch Input M-XPort Tuner USB Audio Return : Up / Down : Change : Disable Enter : SR6004 Exit : Exit DC Trigger Setup TriggerSystem Error!! BLU-RAY DVD VCR DSS TV CD/CDR 7.1ch Input M-XPort Tuner Return : Up / Down : Change : Disable Enter : SR5004 Exit : Exit 5-1 ZONE SETUP This unit has source selectors, sleep timers, zonespeaker output, and remote controller for the two other ZONEs in the ZONE system. These features can be set from this menu. 1. Select "Preference" from the Main Menu with the 3 or 4 cursor buttons and press the ENTER button. 2. Select "Zone A Setup" or "Zone B Setup" with the 3 or 4 cursor buttons. 3. Press the ENTER button to enter the setting. The following explanation shows how to operate ZONE A of the ZONE system. Zone A Setup Audio Source Sleep Timer Stereo / Mono. Zone Pre Out Volume Mode Level Zone Speaker Out Volume Mode Level : BLU-RAY : Off : Stereo : Off : Variable : -90dB Return : Up / Down : Change Enter : Exit : Exit The following explanation shows how to operate ZONE B of the ZONE system. Zone B Setup Audio Source Sleep Timer Zone Digital Out : BLU-RAY(Dig.-) : Off : Off Return : Up / Down : Change Enter : Exit : Exit 4. Select the desired item with the 3 or 4 cursor button. Audio Source: Select the audio source of the ZONE output with the 1 or 2 cursor buttons. SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS