Marantz SR6004 SR6004 / SR5004 User Manual - English - Page 41

Acoustic EQ. EQ Mode Adjust User EQ Check Audyssey MultEQ Audyssey Dynamic EQ Audyssey Dynamic EQ Adj. Audyssey Dynamic Volume : Off : Off : 0dB : Off Return : Up / Down : Change Adjust User EQ Reset : Channel Channel : Front Left 63Hz : 0.0dB 125Hz : 0.0dB 250Hz : 0.0dB 500Hz : 0.0dB 1kHz : 0.0dB 2kHz : 0.0dB 4kHz : 0.0dB 8kHz : 0.0dB 16kHz : 0.0dB Return : Up / Down : Change [dB] +9dB 0dB -9dB -18dB 63 125 250 500 1k 2k 4k 8k 16k [Hz] Enter : Exit : Exit Enter : Exit : Exit Check Audyssey MultEQ EQ Mode : Audyssey Channel : Front Left 63Hz : -15.0dB 125Hz : -2.0dB 250Hz : -5.0dB 500Hz : +9.0dB 1kHz : +3.0dB 2kHz : -5.0dB 4kHz : -7.0dB 8kHz : -18.0dB 16kHz : -20.0dB Return : Up / Down : Change [dB] +9dB 0dB -9dB -18dB 63 125 250 500 1k 2k 4k 8k 16k [Hz] Enter : Exit : Exit 6-1 ADJUST USER EQ These modes allow you to set a 9-band graphic equalizer for each of the 7 channels. 1. Select "Adjust User EQ" with the 3 or 4 cursor buttons. 2. Press the ENTER button to enter the selection. Adjust User EQ Reset : Channel Channel : Front Left 63Hz : 0.0dB 125Hz : 0.0dB 250Hz : 0.0dB 500Hz : 0.0dB 1kHz : 0.0dB 2kHz : 0.0dB 4kHz : 0.0dB 8kHz : 0.0dB 16kHz : 0.0dB Return [dB] +9dB 0dB -9dB -18dB 63 125 250 500 1k 2k 4k 8k 16k [Hz] : Up / Down : Change Enter : Exit : Exit Reset: Using the 1 or 2 cursor buttons, select the channel(s) to be reset to either the currently displayed channel ("Channel") or all channels ("All-Channel"), and press the ENTER button to enter the setting. "All-Channel" : Resets all channels. "Channel" : Resets only the currently displayed channel. Channel: Select the channel ("Front Left", "Front Height Left", "Center", "Front Height Right", "Front Right", "Surround Right", "Surround Back Right", "Surround Back Left" or "Surround Left") to adjust with the 1 or 2 cursor buttons, and switch to the adjustment mode with the 4 cursor button. Frequency: Select the target frequency on the graph with the 3 or 4 cursor buttons. Adjust the level with the 1 or 2 cursor buttons. (Note that this can be adjusted to any level between -20 and +9 dB in 0.5 dB increments.) Move to the next frequency with the 3 or 4 cursor buttons, and adjust the level. 6-2 CHECK AUDYSSEY MULTEQ® These menus are for confirming the results of Auto Setup function equalizer measurement (Audyssey Front, Audyssey Flat, Audyssey). 1. Select "Check Audyssey MultEQ" with the 3 or 4 cursor buttons. 2. Press the ENTER button to enter the selection. Check Audyssey MultEQ EQ Mode : Audyssey Channel : Center 63Hz : -15.0dB 125Hz : -2.0dB 250Hz : -5.0dB 500Hz : +9.0dB 1kHz : +3.0dB 2kHz : -5.0dB 4kHz : -7.0dB 8kHz : -18.0dB 16kHz : -20.0dB Return : Up / Down : Change [dB] +9dB 0dB -9dB -18dB 63 125 250 500 1k 2k 4k 8k 16k [Hz] Enter : Exit : Exit EQ Mode: Select EQ (mode) with the 1 or 2 cursor buttons followed by the desired equalizer ("Audyssey", "Audyssey Front", "Audyssey Flat"). Channel: Select the channel to check with the 1 or 2 cursor buttons. Notes • The frequency will not be exactly the same as in the Preset Graphic EQ modes. • Front Left and Front Right are not indicated on the Audyssey Front mode. 3. Once finished checking, select "Return" with the 3 or 4 cursor buttons and press the ENTER button to return to the "Acoustic EQ" menu. After you complete this portion of the setup move cursor to "Return" with the 3 or 4 cursor buttons and press the ENTER button. ENGLISH SETUP 39 OTHERS TROUBLESHOOTING ADVANCED OPERATION SETUP ADVANCED CONNECTIONS BASIC OPERATION BASIC NAMES AND CONNECTIONS FUNCTIONS