Marantz SR6004 SR6004 / SR5004 User Manual - English - Page 84

NAMES AND FUNCTIONS CONNECTIONS BASIC BASIC OPERATION ADVANCED CONNECTIONS ENGLISH TROUBLESHOOTING XM SATELLITE RADIO If a problem should arise, first check the following. 1. Are the connections correct? 2. Have you operated the receiver according to the operating instructions? 3. Are the speakers and other components operating properIy? If this unit is not operating properly, Check the items listed in the table beIow. Should the problem persist, there may be a malfunction. Disconnect the power immediately and contact your store of purchase. Symptom "TUNER" is displayed. "ANTENNA" is displayed. "NO SIGNAL" is displayed. Receiving only channels 0 and 1. "UPGRADE TUNER" is displayed. Cause Solution The XM Mini-Tuner and this unit Check that the units are properly are not properly connected. connected. The XM antenna is not properly connected to the Mini-Tuner Dock. Check that the antenna is properly connected. Also, check the antenna cable for damage. The Signal cannot be received. Reposition your XM antenna. The XM Mini-Tuner is not activated. Contact XM Satellite Radio. The connected XM CNP-1000 is incompatible. Upgrade the XM CNP-1000 to the XM Mini-Tuner. Report the model of the AV receiver and the ID number of the CNP-1000 to XM Listener Care. Page 23 23 - 47 47 SIRIUS SATELLITE RADIO FRONT KEY (BUTTON) LOCK OF THE UNIT PURE DIRECT EXIT The keys (buttons) on the front panel of the unit (except POWER ON/STANDBY) can be locked so that, except for remote control operations, none of the unit's operations will be acknowledged. HOW TO LOCK THE FRONT KEYS (BUTTONS) 1. Hold down both the PURE DIRECT and EXIT buttons on the front panel simultaneously for at least 3 seconds.
2.
"F-KEY LOCK!" is indicated on the display, and no further operations initiated by the front panel buttons, with the exception of POWER ON/STANDBY, are acknowledged. GENERAL MALFUNCTION If the equipment malfunctions, this may be because an electrostatic discharge or AC line interference has corrupted the information in the equipment memory circuits. Therefore: - disconnect the plug from the AC line supply - after waiting at least three minutes, reconnect the plug to the AC line supply - re-attempt to operate the equipment MEMORY BACKUP In case a power outage occurs or the power cord is accidentally unplugged, this unit is equipped with a backup function to prevent memory data such as the preset memory from being erased. HOW TO RESET THE UNIT SURR. MODE CLEAR Symptom Cause Solution "TUNER ERR" is SiriusConnectTM tuner is not displayed. properly connected. Check the 8pin mini DIN cable and AC adapter connection are correct. "ANTENNA" is displayed Antenna is not properly connected. Check the antenna cable connection is correct. "ACQUIRING" is displayed. The signal cannot be received. Reposition your SiriusConnectTM tuner and antenna. "CALL SIRIUS" is You have not subscribed for the displayed selected channel. Call SIRIUS if you want to subscribe. "FIRM UPDT" is SiriusConnectTM is updating displayed software. Wait until the updating is complete. Page 23 23 - 47 - HOW TO RELEASE THE FRONT KEY (BUTTON) LOCK
1.
Again hold down both the PURE DIRECT and EXIT buttons on the front panel simultaneously for at least 3 seconds.
2.
"F-KEY UNLOCK" is indicated on the display, and the lock is released. Should the operation or display seem to be abnormal, reset the unit with the following procedure. This unit is turned on, press and hold the SURR. MODE + CLEAR buttons simultaneously for 3 seconds or more. Remember that the procedure will reset the settings of the function selector, Surround mode, delay time, TUNER PRESET etc., to their initial settings. SETUP ADVANCED OPERATION TROUBLESHOOTING OTHERS 82