Netgear FSM726v3 7000 Series Managed Switch Administration Guide for Software - Page 108
Web Interface: Configuring an Inter-Area Router
View all Netgear FSM726v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
NETGEAR Managed Switches Software Administration Manual, Release 8.0 Step 2: Assign IP addresses for ports. (Netgear Switch) #config (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#routing (Netgear Switch) (Interface 1/0/2)#ip address 192.150.2.1 255.255.255.0 (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#routing (Netgear Switch) (Interface 1/0/3)#ip address 192.150.3.1 255.255.255.0 (Netgear Switch) (Interface 1/0/3)#exit (Netgear Switch) (Config)#exit Step 3: Specify the router ID and enable OSPF for the switch. Set disable1583 compatibility to prevent the routing loop. (Netgear Switch) #config (Netgear Switch) (Config)#router ospf (Netgear Switch) (Config router)#enable (Netgear Switch) (Config router)#router-id 192.150.9.9 (Netgear Switch) (Config router)#no 1583compatibility (Netgear Switch) (Config router)#exit (Netgear Switch) (Config)#exit Step 4: Enable OSPF and set the OSPF priority and cost for the ports. (Netgear Switch) #config (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#ip ospf (Netgear Switch) (Interface 1/0/2)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface 1/0/2)#ip ospf priority 128 (Netgear Switch) (Interface 1/0/2)#ip ospf cost 32 (Netgear Switch) (Interface 1/0/2)#exit (Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#ip ospf (Netgear Switch) (Interface 1/0/3)#ip ospf areaid 0.0.0.3 (Netgear Switch) (Interface 1/0/3)#ip ospf priority 255 (Netgear Switch) (Interface 1/0/3)#ip ospf cost 64 (Netgear Switch) (Interface 1/0/3)#exit (Netgear Switch) (Config)#exit Web Interface: Configuring an Inter-Area Router To use the Web interface to configure OSPF on the switch, proceed as follows: 8-3 OSPF v1.0, October 2009