Netgear FSM726v3 7000 Series Managed Switch Administration Guide for Software - Page 204

NETGEAR Managed Switches Software Administration Manual, Release 8.0 CLI: Configuring ACL Mirroring Create an IP Access Control List with the name monitorHost. (Netgear Switch) (Config)# ip access-list monitorHost Define the rules to match the host 10.0.0.1 and to permit every other. (Netgear Switch) (Config-ipv4-acl)# permit ip 10.0.0.1 0.0.0.0 any mirror 1/0/19 (Netgear Switch) (Config-ipv4-acl)# permit every Bind the ACL with the interface 1/0/1. (Netgear Switch) (Interface 1/0/1)#ip access-group monitorHost in 1 View the configuration. (Netgear Switch) # show ip access-lists Current number of ACLs: 1 Maximum number of ACLs: 100 ACL ID/Name Rules Direction monitorHost 2 inbound Interface(s 1/0/1 VLAN(s (Netgear Switch) #show ip access-lists monitorHost ACL Name: monitorHost Inbound Interface(s): 1/0/1 Rule Number: 1 Action permit Match All FALSE Protocol 255(ip) Source IP Address 10.0.0.1 Source IP Mask 0.0.0.0 Mirror Interface 1/0/19 Rule Number: 2 Action permit Match All TRUE 11-44 v1.0, October 2009 Access Control Lists (ACLs)