Netgear FSM726v3 7000 Series Managed Switch Administration Guide for Software - Page 392

NETGEAR Managed Switches Software Administration Manual, Release 8.0 Here the max datagram size is default 1400. It can be modified to a value between 200 to 9116 using the command sflow receiver 1 maxdatagram . (GSM7328S) #show sflow receivers Receiver Owner Time out Max Datagram Port IP Address Index String Size 1 NetMonit 31535988 1400 6343 192.168.10.2 2 0 1400 6343 0.0.0.0 3 0 1400 6343 0.0.0.0 4 0 1400 6343 0.0.0.0 5 0 1400 6343 0.0.0.0 6 0 1400 6343 0.0.0.0 7 0 1400 6343 0.0.0.0 8 0 1400 6343 0.0.0.0 (GSM7328S) # Configure sampling ports sFlow receiver index, sampling rate, sampling max header size. It has to be repeated for all the ports to be sampled. (Netgear Switch) (Config)# interface 1/0/1 (Netgear Switch) (Interface 1/0/1)# sflow sampler 1 (Netgear Switch) (Interface 1/0/1)# sflow sampler rate 1024 (Netgear Switch) (Interface 1/0/1)# sflow sampler maxheadersize 64 View the sampling port configurations. (GSM7328S) #show sflow samplers Sampler Data Source ----------1/0/1 Receiver Index 1 Packet Sampling Rate 1024 Max Header Size 64 Web Interface: Configuring Statistical Packet-based Sampling with sFlow 1. Configure the sFlow receiver IP address. a. From the main menu, select Monitoring > sFlow > Advanced > sFlow Receiver Configuration. b. Select the check box against 1. c. Enter Receiver Owner as NetMonitor. d. Enter Receiver Timeout as 31536000. 20-7 v1.0, October 2009 SNMP