Netgear FSM726v3 7000 Series Managed Switch Administration Guide for Software - Page 531
Enable DVMRP protocol on the switch., Enable DVMRP mode on the interface 1/0/1, 1/0/13 and 1/0/21.
View all Netgear FSM726v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 531 highlights
NETGEAR Managed Switches Software Administration Manual, Release 8.0 Enable DVMRP protocol on the switch. (Netgear Switch) (Config)#ip dvmrp Enable DVMRP mode on the interface 1/0/1,1/0/13 and 1/0/21. (Netgear Switch) (Config)#interface 1/0/1 (Netgear Switch) (Interface 1/0/1)#ip dvmrp (Netgear Switch) (Interface 1/0/1)#exit (Netgear Switch) (Config)#interface 1/0/13 (Netgear Switch) (Interface 1/0/13)#ip dvmrp (Netgear Switch) (Interface 1/0/13)#exit (Netgear Switch) (Config)#interface 1/0/21 (Netgear Switch) (Interface 1/0/21)#ip dvmrp (Netgear Switch) (Interface 1/0/21)#exit (Netgear Switch) #show ip dvmrp neighbor Interface 1/0/13 Neighbor IP Address 192.168.2.2 State Active Up Time (hh:mm:ss 00:02:40 Expiry Time (hh:mm:ss 00:00:25 Generation ID 1116347719 Major Version 3 Minor Version 255 Capabilities Prune GenID Missing 11441 Received Routes 0 Received Bad Packets 0 Received Bad Routes 0 Interface 1/0/21 Neighbor IP Address 192.168.3.1 State Active Up Time (hh:mm:ss 00:01:44 Expiry Time (hh:mm:ss 00:00:28 Generation ID 1116595047 Major Version 3 Minor Version 255 More Entries or quit(q) Capabilities Prune GenID Missing 11441 Received Routes 0 Received Bad Packets 0 Received Bad Routes 0 (Netgear Switch) #show ip mcast mroute summary Multicast Route Table Summary Incoming Source IP Group IP Protocol Interface 192.168.1.2 225.0.0.1 DVMRP 1/0/1 Outgoing Interface List 1/0/21 DVMRP v1.0, October 2009 31-3