Netgear FSM726v3 7000 Series Managed Switch Administration Guide for Software - Page 556
Remote Authorization (RADIUS) User Configuration
View all Netgear FSM726v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 556 highlights
NETGEAR Managed Switches Software Administration Manual, Release 8.0 • In the User ID Field, enter 2. • In the User Name field, enter user1. • In the Password field, enter 12345678. • In the Confirm Password field, enter 12345678. • In the Group field, select 2. c. Click Add. Remote Authorization (RADIUS) User Configuration A remote RADIUS server can be used for client authentication. The RADIUS authentication and accounting servers are configured in 8.0 separate from the captive portal configuration. In order to perform authentication/accounting via RADIUS, the administrator configures one or more RADIUS servers and then references the server(s) using their name in the captive portal configuration, each captive portal instance can be assigned one RADIUS authentication server and one RADIUS accounting server. If RADIUS is enabled for a captive portal configuration and no RADIUS servers are assigned, the captive portal activation status will indicate the instance is disabled with an appropriate reason code. The following table indicates the RADIUS attributes that are used to configure captive portal users. The table indicates both RADIUS attributes and vendor specific attributes (VSA) that are used to configure Captive Portal. VSAs are denoted in the id column and are comma delimited (vendor id, attribute id). Table 32-1. RADIUS Attributes for Configuring Captive Portal Users RADIUS Attribute No. User-Name 1 User-Password 2 Session-Timeout 27 Idle-Timeout 28 Description Range Usage User name to be authorized 1-32 characters Required User password 8-64 characters Required Logout once session timeout is reached (seconds). If the attribute is 0 or not present then use the value configured for the captive portal. Integer (seconds) Optional Logout once idle timeout is reached (seconds). If the attribute is 0 or not present then use the value configured for the captive portal. Integer (seconds) Optional Default None None 0 0 32-8 v1.0, October 2009 Captive Portal