Netgear FSM726v3 7000 Series Managed Switch Administration Guide for Software - Page 84

NETGEAR Managed Switches Software Administration Manual, Release 8.0 2. Select Static in the Route Type field. 3. Enter Network Address field. Noted this field is expecting a network IP address, not a host IP address. Do not put down something like "10,100.100.1". The last number should always be zero. 4. Enter Subnet Mask that matches the subnet range desired. 5. The Preference field is optional. A value of one will be chosen if nothing is entered. 6. Click the Add button on the bottom of this page. The web page will be updated with static route shown in the route table. 7. To remove the route entry, either static or default, simply check the box on the left hand side of the entry, and click the Delete button on the bottom of the page. 5-9 Port Routing v1.0, October 2009