Netgear FSM726v3 7000 Series Managed Switch Administration Guide for Software - Page 357

NETGEAR Managed Switches Software Administration Manual, Release 8.0 b. Under Dual Image Configuration, scroll down to image 2, select the checkbox for that image. The image2 now appears in the Image name field at the top. c. Select TRUE in the Active Image field. d. Click Apply. Outbound Telnet In this section, the following examples are provided: • "CLI: show network" on page 17-11 • "CLI: transport output telnet" on page 17-12 • "CLI: session-limit and session-timeout" on page 17-13 Outbound Telnet: • Establishes an outbound telnet connection between a device and a remote host • A telnet connection is initiated, each side of the connection is assumed to originate and terminate at a "Network Virtual Terminal" (NVT) • Server and user hosts do not maintain information about the characteristics of each other's terminals and terminal handling conventions • Must use a valid IP address CLI: show network (Netgear Switch Routing) >telnet 192.168.77.151 Trying 192.168.77.151... (Netgear Switch Routing) User:admin Password: (Netgear Switch Routing) >en Password: (Netgear Switch Routing) #show network IP Address 192.168.77.151 Subnet Mask 255.255.255.0 Default Gateway 192.168.77.127 Burned In MAC Address 00:10:18.82.04:E9 Locally Administered MAC Address......... 00:00:00:00:00:00 MAC Address Type Burned In Network Configuration Protocol Current... DHCP Management VLAN ID 1 Web Mode Enable Java Mode Disable Tools v1.0, October 2009 17-11