Nokia N-GAGE User Guide - Page 35

Camera connectivity, press the call key, or select Send ( ). This option is not available during a call. You may not be able to send video clips saved in the MPEG-4 file format in a multimedia message. You can also send the video clip to a person you are talking to. Select Send to caller ( ) (only available during a call). • To add the video clip to an album, select Add to album • To upload the video clip to a compatible online album, select (only available if you have set up an account for a compatible online album). • To return to the viewfinder to record a new video clip, press the capture key. Camera settings There are two kinds of settings for the camera: setup settings and main settings. The setup settings return to the default settings after you close the camera, but the main settings remain the same until you change them again. To adjust the setup settings, use the options in the active toolbar. See "Colour and lighting settings", p. 35. To change the main settings, in the image or video mode, select Options > Settings. Record location - To add GPS location coordinates to each image file, select On. Receiving a GPS signal may take time or the signal may not be available. Show captured image - Select whether to view the captured image after it is taken or to continue image capturing immediately. Default image name - Define the default name for the captured images. Extended digital zoom - The setting is only available in the main camera.On (continuous) allows the zoom increments to be smooth and continuous between digital and extended digital zoom, On (paused) allows the zoom increments to pause at the digital and extended digital step point, and Off allows a limited amount of zoom while retaining the image resolution. Use the extended zoom only when getting closer to the subject is more important than the final image quality. The overall quality of a digitally zoomed image is always lower than that of an unzoomed image. Capture tone - Set the tone that sounds when you capture an image. Memory in use - Select where to store your images. Restore camera settings - Restore the camera settings to default values. Still image camera settings To change the main settings, in the image mode, select Colour and lighting settings In the active toolbar, select from the following: Options > Settings and from the following: Flash mode ( ) (image only) - Select the desired flash Image quality - Set the resolution (main camera only). mode. The better the image quality, the more memory the image Colour tone ( ) - Select a colour effect. consumes. Switch video light on or Switch video light off 35 Add to album - Save the image to an album in Photos. - Switch the video light on or off (video mode only).