Onkyo TX SR805 Owner Manual - Page 102
Connecting Zone3, Zone 2 Video Output TX-SR875 only, Zone 2 12V Trigger
UPC - 751398007606
View all Onkyo TX SR805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Zone 2 and Zone 3-Continued Zone 2 Video Output (TX-SR875 only) The TX-SR875 features a composite video output for connection to a TV in Zone 2, so you can enjoy both audio and video in that zone. Hookup • Use a composite video cable to connect the AV receiver's ZONE 2 OUT V jack to a composite video input on your Zone 2 TV. Main room TV AV receiver ZONE 2 OUT Connecting Zone 3 Zone 3 speakers must be connected to an amp in Zone 3. Connecting Your Zone 3 Speakers You can enjoy 2-channel stereo playback in Zone 3 and a different source to those selected for your main room and Zone 2. Hookup • Use an RCA audio cable to connect the AV receiver's ZONE 3 PRE OUT L/R jacks to an analog audio input on your Zone 3 amp. • Connect your Zone 3 speakers to the speaker terminals on your Zone 3 amp. Main room TV Zone 2 TV Note: • The ZONE 2 OUT V jack outputs video from compo- nents connected to composite video inputs and S-Video inputs. Zone 2 12V Trigger When Zone 2 is turned on, the output from the ZONE 2 12V TRIGGER OUT goes high (+12 volts, 100 milliamperes max). Connecting this jack to a 12-volt trigger input on a component in Zone 2 will make that component turn on or off as and when Zone 2 is turned on or off on the AV receiver. AV receiver ZONE 2 ZONE 3 L R PRE OUT Zone 3 IN R L Receiver/ integrated amp Note: • With the default settings, the Zone 3 volume must be set on the Zone 3 amp. If your Zone 3 amp has no volume control, set the Zone 3 Out setting to Variable so that you can set the Zone 3 volume on the AV receiver (see page 104). 102