Onkyo TX SR805 Owner Manual - Page 70

Common Functions-Continued Selecting Audio Inputs Specifying the Digital Signal Format AUDIO SEL REC PLAYLIST RANDOM STEREO LISTENING MODE SURR REPEAT AUDIO SUBTITLE PLAY MODE PURE A DIRECT THX ALL ST TEST TONE CH SEL OPEN/CLOSE VIDEO OFF AUDIO SEL VCR LEVEL- L NIGHT DVD LEVEL+ Re-EQ HDD RC-690M If you connect a component to more than one audio input, such as a DVD player connected to analog, digital, multichannel, and HDMI inputs, you can use the [AUDIO SEL] button to select which audio input you want to use to listen to that component. Press the [AUDIO SEL] button AUDIO SEL repeatedly to select an audio input: HDMI > Auto > Multich > Analog. HDMI: Selects the assigned HDMI IN, and the HDMI indicator appears on the display. (The HDMI IN must already be assigned to the current input selector. See page 48.) Auto: Selects the assigned COAX- IAL or OPTICAL DIGITAL IN, and the DIGITAL indica- tor appears on the display. (The DIGITAL IN must already be assigned to the current input selector. See page 52.) If there is no digital signal, the analog input is used instead. Multich:Selects the multichannel input, and the ANALOG indi- cator appears on the display. (The multichannel input must already be assigned to the current input selector. See page 54.) Analog: Selects the analog input, and the ANALOG indicator appears on the display. 12 STANDBY/ON STANDBY READY ZONE 2 ZONE 3 MASTER VOLUME PURE AUDIO AUDIO SEL DVD VCR/DVR CBL/SAT GAME/TV AUX 1 AUX 2 TAPE TUNER PHONES POWER ZONE 2 OFF LEVEL TONE HDMI OUT STEREO THX TUNING RT/PTY/TP MEMORY MODE SETUP ON OFF ZONE 3 DIGITAL INPUT LISTENING MODE CLEAR TUNING PRESET TUNING RETURN ENTER CD PHONO SETUP MIC DISPLAY AUX 2 INPUT PUSH TO OPEN S VIDEO VIDEO L AUDIO R DIGITAL Normally, the AV receiver detects the format of digital input signals automatically. However, if you experience either of the following issues when playing PCM or DTS sources, you can specify the signal format manually. • If the beginnings of tracks from a PCM source are cut off, try the PCM setting. • If noise is produced when fast forwarding or rewinding a DTS CD, try the DTS setting. 1 Press the [AUDIO SEL] button repeatedly to select Auto. AUDIO SEL 2 While "Auto" is shown on the display, use the Left and Right [ ]/[ ] buttons to select: PCM: Only input signals in PCM format are output, and the PCM indicator lights up. The indicator flashes if the input signal is not PCM. DTS: Only input signals in DTS format are output, and the DTS indicator lights up. The indicator flashes if the input signal is not DTS. Auto (default): The format is detected automatically. If no digital input signal is present, the analog input is used instead. 70