Onkyo TX SR805 Owner Manual - Page 106

Zone 2 and Zone 3-Continued Adjusting the Volume of Zones Remote controller ZONE3 ZONE2 On the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then use the [LEVEL-] and [LEVEL+] buttons. LEVEL LEVEL AV receiver On the AV receiver, press the [ZONE 2] or [ZONE 3] button, press the [LEVEL] button, and then use the Up [ ] and Down [ ] buttons. Muting Zones On the remote controller, press ZONE3 the [ZONE 2] or [ZONE 3] ZONE2 REMOTE MODE button, and then press the [MUTING] button. MUTING To unmute a zone, on the remote controller, press the [ZONE 2] or [ZONE 3] REMOTE MODE button, and then press the [MUTING] button again. Adjusting the Balance of Zones 1 AV receiver ZONE 2 On the AV receiver, press the [ZONE 2] or [ZONE 3] button. ZONE 3 2 TONE Press the AV receiver's [TONE] button repeatedly to select Balance. 3 Use the Up [ ] and Down [ ] buttons to adjust the balance. You can adjust the balance from 0 in the center to +10 dB to the right or +10 dB to the left in 2 dB steps. Adjusting the Tone of Zone 2 1 AV receiver ZONE 2 On the AV receiver, press the [ZONE 2] or [ZONE 3] button. ZONE 3 2 TONE 3 Press the AV receiver's [TONE] button repeatedly to select Bass or Treble. Use the Up [ ] and Down [ ] buttons to adjust the bass or treble. You can boost or cut the Bass or Treble from -10 dB to +10 dB in 1 dB steps. Notes: • Zones can also be unmuted by adjusting the volume. • The tone cannot be adjusted for Zone 3. • The Zone 2 level, balance, and tone functions have no effect on the ZONE 2 PRE OUT when the Zone 2 Out setting is set to Fixed (page 104). • The Zone 3 level and balance functions have no effect on the ZONE 3 PRE OUT when the Zone 3 Out setting is set to Fixed (page 104). 106