Onkyo TX SR805 Owner Manual - Page 91
Manual, Audyssey
UPC - 751398007606
View all Onkyo TX SR805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Advanced Setup-Continued Equalizer Settings These settings are set automatically by the Automatic Speaker Setup function (see page 55). With the Equalizer settings, you can adjust the tone of speakers individually with a 7-band equalizer. The volume of each speaker can be set on page 90. 1 RECEIVER Press the [RECEIVER] REMOTE MODE button, followed by the [SETUP] button. The main menu appears onscreen. SETUP 2 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "2. Speaker Setup," and then press [ENTER]. The Speaker Setup menu appears. 2.Speaker Setup 1.Speaker Settings 2.Speaker Config 3.Speaker Distance 4.Level Calibration 5.Equalizer Settings 6.THX Audio Setup 3 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "5. Equalizer Settings," and then press [ENTER]. The Equalizer Settings screen appears. 2-5.Equalizer Settings Equalizer Channel 63Hz 160Hz 400Hz 1000Hz 2500Hz 6300Hz 16000Hz Manual Front 0dB 0dB 0dB 0dB 0dB 0dB 0dB 4 ENTER 5 ENTER Use the Left and Right [ ]/[ ] buttons to set the "Equalizer" option to: Off: Equalizer off, flat response. Manual: The equalizer for each speaker can be set manually. Audyssey:The equalizer for each speaker is set automatically by the Automatic Speaker Setup function. If you selected Manual, continue with the next step. If you selected Off or Audyssey, go to step 8. Use the Down [ ] button to select "Channel," and then use the Left and Right [ ]/[ ] buttons to select the speaker. You can select: Front, Center, Surround, Surr Back, or Subwoofer. ENTER 6 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select a frequency, and use the Left and Right [ ]/[ ] buttons to cut or boost that frequency. You can select: 63 Hz, 160 Hz, 400 Hz, 1000 Hz, 2500 Hz, 6300 Hz, or 16000 Hz. And for the subwoofer, 25 Hz, 40 Hz, 63 Hz, 100 Hz, or 160 Hz. Each band can be cut or boosted from -6 dB to +6 dB in 1 dB steps. Tip: Low frequencies, such as 160 Hz, affect bass sounds; high frequencies, such as 6300 Hz, affect treble sounds. 91