Pioneer AVIC-F30BT Operation Manual - Page 150
Switching the muting, attenuation level, Switching Auto PI seek, Setting the FM tuning step
View all Pioneer AVIC-F30BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Chapter 26 Customising preferences - When the navigation outputs the guidance voice. - When you use a mobile phone via Bluetooth technology (dialling, talking, incoming call). - When the voice recognition mode is activated. ! Tel/VR: The volume is muted or attenuated according to the following conditions. - When you use a mobile phone via Bluetooth technology (dialling, talking, incoming call). - When the voice recognition mode is activated. ! Off: The volume does not change. AVIC-F930BT, AVIC-F9310BT ! Guide/Tel: The volume is muted or attenuated according to the following conditions. - When the navigation outputs the guidance voice. - When you use a mobile phone via Bluetooth technology (dialling, talking, incoming call). ! Tel: The volume is muted or attenuated when you use a mobile phone via Bluetooth technology (dialling, talking, incoming call). ! Off: The volume does not change. p AV source volume returns to normal when the corresponding action ends. Switching the muting/ attenuation level You can select the muting/attenuation level of "Mute". This setting is also effective for a mute signal that has been received from the MUTE lead connected to the navigation unit. p This menu is not available when AV source is "Off". 1 Display the "AV System Settings" screen. = For details, refer to Displaying the screen for AV system settings on page 147. 2 Touch [Mute Level]. Each touch of [Mute Level] changes the settings as follows: ! 20dB: The volume becomes 1/10. ! 10dB: The volume becomes 1/3. ! All: The volume becomes 0. p When you select "All", no audio adjust- ments are possible during the sound is turned off. p When you select "20dB" or "10dB", no audio adjustments are possible during the sound is attenuated. p AV source volume returns to normal when the corresponding action ends. p Even when a mute signal has been received from MUTE lead connected to the navigation unit, navigation voice guidance cannot be attenuated or muted. Switching Auto PI seek The navigation system can automatically search for a different station with the same programming, even during preset recall. p "Auto PI" can be set only when the source is selected to "Off". 1 Display the "AV System Settings" screen. = For details, refer to Displaying the screen for AV system settings on page 147. 2 Touch [Auto PI]. Each touch of [Auto PI] changes the settings as follows: ! Off (default): Deactivates the Auto PI seek function. ! On: Activates the Auto PI seek function. Setting the FM tuning step Normally the FM tuning step employed by seek tuning is 50 kHz. When "AF" or "TA" is on, the tuning step automatically changes to 100 kHz. But you can set the tuning step to 50 kHz when "AF" or "TA" is on. 150 Engb