Pioneer AVIC-F30BT Operation Manual - Page 76

Chapter 14 Using the radio (FM) Limiting stations to regional programming When AF is used to automatically retune frequencies, the regional function limits the selection to stations broadcasting regional programmes. 1 Touch on the "FM" screen. The "Function" menu appears. 2 Touch [Regional]. Each touch of [Regional] turns it on or off. p Regional programming and regional networks are organised differently depending on the country (i.e., they may change according to the time, country or broadcast area). p The preset number may disappear on the display if the tuner tunes in a regional station that differs from the originally set station. p The regional function can be turned on or off independently for each FM band. Searching for an RDS station by PTY information You can search for general types of broadcasting programmes. = For details, refer to PTY list on page 79. 1 Touch on the "FM" screen. The "Function" menu appears. 2 Touch [PTY]. 3 Touch [cPrev] or [Nextd] to select a programme type. There are four programme types: NEWS&INF - Popular - Classics - Others 4 Touch [Start] to begin a search. The tuner searches for a station broadcasting that programme type. # If you touch [Stop], the search is cancelled. p The programmes of some stations may differ from that indicated by the transmitted PTY. 76 Engb p If no station is broadcasting the type of programme you searched for, "Not Found" is displayed for about two seconds and then the tuner returns to the original station. Receiving traffic announcements TA (traffic announcement standby) lets you receive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a station that broadcasts traffic information) or another enhanced network's TP station (a station carrying information that cross-references TP stations). 1 Tune in a TP station or another enhanced network's TP station. 2 Touch [TA] on the "Function" menu to turn traffic announcement standby on. p To turn traffic announcements standby off, touch [TA] again. 3 Use the VOL (+/-) button or Multi-control to adjust the TA volume when a traffic announcement begins. The newly set volume is stored in memory and recalled for subsequent traffic announcements. 4 Touch [Cancel] while a traffic announcement is being received to cancel the announcement. The tuner returns to the original source but remains in standby mode until [TA] is touched again. You can also cancel the announcement by changing the source or band. p The system switches back to the original source following traffic announcement reception. p Only TP stations and other enhanced networks' TP stations are tuned in during seek tuning or BSM when the TA function is on.