Pioneer AVIC-F30BT Operation Manual - Page 154
Adjusting the equaliser curve, automatically Auto EQ
View all Pioneer AVIC-F30BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Chapter 26 Customising preferences 1 Display the "AV Sound Settings" screen. = For details, refer to Displaying the screen for AV sound settings on page 151. 2 Touch [EQ]. 3 Touch one of the keys to select a curve that you want to use as the basis of customising. 4 Touch [Customize]. 5 Touch the frequency that you want to adjust the level. 3 Touch the key next to "Auto EQ" to turn the auto-adjusted equaliser on or off. 4 Select the equaliser curve. Adjusting the equaliser curve automatically (Auto EQ) By measuring the vehicle's acoustics, the equaliser curve can be adjusted automatically to suit the interior of the vehicle. WARNING A loud tone (noise) may be emitted from the speakers when measuring the vehicle's acoustics. Never perform the Auto EQ measurement while driving. 6 Touch [a] or [b] to adjust the level of the equaliser band. Each time you touch [a] or [b], the level of the equaliser band increases or decreases. Using the auto-adjusted equaliser You can set the auto-adjusted equaliser to suit the vehicle's acoustics. To use this function, the vehicle's acoustics must be measured in advance. = For details of the operations, refer to Adjust- ing the equaliser curve automatically (Auto EQ) on this page. p To manually adjust the equaliser curve, set "Auto EQ" to "Off". 1 Display the "AV Sound Settings" screen. = For details, refer to Displaying the screen for AV sound settings on page 151. 2 Touch [EQ]. CAUTION ! Thoroughly check the conditions before per- forming Auto EQ, as the speakers may be damaged if this is performed under the following conditions: - When the speakers are incorrectly con- nected. (For example, when a rear speaker is connected as a subwoofer output.) - When a speaker is connected to a power amp delivering output higher than the speaker's maximum input power capability. ! If the microphone for acoustical measurement (sold separately) is not placed in an appropriate location, the measurement tone may become loud and measurement may take a long time, resulting in battery drainage. Be sure to place the microphone in the specified location. 154 Engb