Pioneer VSX 82TXS Owner's Manual - Page 29

Listening to your system 05 Tip • When an Advanced Surround listening mode is selected (except ADV. VIR. SURR.), the effect level can be adjusted using the EFFECT parameter in Setting the AV options on page 66. Listening in stereo When you select STEREO, you will hear the source through just the front left and right speakers (and possibly your subwoofer depending on your speaker settings). Dolby Digital and DTS multichannel sources are downmixed to stereo. PHOTO STATUS SIGNAL SEL SBch STEREO MULTI OPE THX STANDARD ADV. SURR SHIFT PHASE MCACC S.DIRECT RECEIVER • While listening to a source, press STEREO for stereo playback. Using Stream Direct Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unnecessary signal processing is bypassed, and you're left with the pure analog or digital sound source (see Stream direct with different input signal formats on page 88). PHOTO STATUS SIGNAL SEL SBch STEREO MULTI OPE THX STANDARD ADV. SURR SHIFT PHASE MCACC S.DIRECT RECEIVER 1 While listening to a source, press S.DIRECT (AUTO SURR/STREAM DIRECT) to select the mode you want. Check the digital format indicators in the front panel display to see how the source is being processed. • AUTO SURROUND - See Auto playback on page 27. • DIRECT - Sources are heard according to the settings made in the Surround Setup (speaker setting, channel level, speaker distance, acoustic calibration EQ, and X-curve), as well as with dual mono, the input attenuator, and any sound delay and hi-bit/hi-sampling settings. You will hear sources according to the number of channels in the signal. • PURE DIRECT - Analog and PCM sources are heard without any digital processing.1 No sound is output from the Second Zone in this mode. Selecting MCACC presets • Default setting: MEMORY 1 If you have calibrated your system for different listening positions2, you can switch between settings to suit the kind of source you're listening to and where you're sitting (for example, watching movies from a sofa, or playing a video game close to the TV). PHOTO STATUS SIGNAL SEL SBch STEREO MULTI OPE THX STANDARD ADV. SURR SHIFT PHASE MCACC S.DIRECT RECEIVER • While listening to a source, press MCACC (MCACC POSITION). Press repeatedly to select one of the six MCACC presets3 or to switch calibration off. See Data Management on page 42 to check and manage your current settings. Note 1 There are cases where a brief noise is heard before playback of sources other than PCM. Please select AUTO SURROUND or DIRECT if this is a problem. 2 Different presets might also have separate calibration settings for the same listening position, depending on how you're using your system. These presets can be set in Automatically setting up for surround sound (MCACC) on page 7 or Automatic MCACC (Expert) on page 34, either of which you should have already completed. 3 You can't use these settings when MULTI CH IN is switched on, and they has no effect when headphones are connected. 29 En