Pioneer VSX 82TXS Owner's Manual - Page 83

Additional information 12 Symptom No picture. No sound, or sound suddenly ceases. Noisy or distorted picture. Remedy • If your display device is not SD (480i) compatible then the 480i to HDMI converted video will not be displayed. In this case, connect using the component, S-video or composite video jacks. • Depending in the output settings of the source component, it may be outputting a video format that can't be displayed. Change the output settings of the source, or connect using the component, S-video or composite jacks. • Try changing the Resolution setting (in Setting the AV options on page 66). • Check that the HDMI AV setting is set to AMP/THROUGH. • If the component is a DVI device, use a separate connection for the audio. • If analog video is being output over HDMI then there will be no HDMI audio output. Please use a separate connection for the audio. • Check the audio output settings of the source component. • Sometimes a video deck may output a noisy video signal (during scanning, for example), or the video quality may just be poor (with some video game units, for example). The picture quality may also depend on the settings, etc. of your display device. Switch off the video converter and reconnect the source and display device using the same type of connection (component, S-video or composite), then start playback again. • If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual or contact the manufacturer for support. iPod messages Symptom Error I1 Error I2 No Track Cause Action There is a problem with the signal path from the Switch off the receiver and reconnect the iPod to the receiver. iPod to the receiver. If this doesn't seem to work, try resetting your iPod. The software version being used with the iPod Update the software being used with the iPod (software needs to be updated. versions prior to iPod update 2004-10-20 are not supported). There are no playable songs currently stored in Input some music files compatible with iPod playback. the iPod. XM radio messages Symptom Check Antenna XM ANT ERR Updating No Signal Loading Off Air XM Cause Action The XM antenna is not connected. Check that the XM antenna cable is attached securely. A short-circuit occurring in the antenna or surrounding antenna cable. Make sure that there is nothing unusual with the antenna or antenna cable. Switch the power off then back on again. The radio is being updated with the latest encryption code. Wait until the encryption code has been updated. Channels 00 and 01 should function normally. The XM signal is too weak at the current location. n/a The receiver is acquiring audio or program information. Wait until the information has been received. The channel currently selected has stopped broadcasting. Select another channel. You have selected a channel that does not exist, The receiver will automatically switch to channel 001 (or the or that you have not subscribed to. last selected channel). There is no artist name/feature, song/program title, or channel category associated with the channel at this time. No action needed. Note • If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions. 83 En