Ricoh 402011 Operating Instructions - Page 11

Connecting the Machine Connecting the Machine Reference A Connect the USB 2.0 interface ca- For details about connection using ble to the USB port on the right 1 Ethernet, see "Connecting the Net- side of the machine's back cover. work Cable to the Network", Net- work Guide. Requirements Before using this machine, make sure all environmental and electrical requirements are met. Connect the machine to the host computer using the USB port or network interface unit. Make sure all cables, connectors, and electrical outlets necessary to attach the machine to the host computer or network are close at hand. Connecting the machine to the host using a USB cable You can connect the machine to the host computer using a USB interface cable. The USB cable is provided according to machine model: • Standard model The USB cable is provided for this model. • Network standard model The USB cable is not provided for this model. Purchase a cable that is suitable for connecting this model to your computer. Follow the procedure below to connect the machine to the host computer using a USB interface cable. ANX001S B Connect the other end to the USB port on the host computer. The machine and computer are now connected. The printer driver and TWAIN driver must be installed next. For details about how to install the printer driver and TWAIN driver, see p.8 "Installing the Printer Driver" and p.9 "Installing the TWAIN Driver". Note ❒ If USB 2.0 is used with Win- dows 98 SE/Me, only a speed equivalent that of USB 1.1 is possible. 5