Ricoh 402011 Operating Instructions - Page 40

Troubleshooting Messages/Second messages Causes Solutions Collate: Page max. The maximum number of pag- Turn off the main power es has been exceeded for colla- switch, and back on again. Re- tion. duce the number of pages to be printed, or, increase memo- ry capacity. When installing a memory module in the machine, contact your sales or service representative. Duplex cancelled. Duplex printing has been canceled. Check the paper used is suitable for duplex printing, or, increase memory capacity. When installing a memory module in the machine, contact your sales or service representative. 5 Duplex mode is in off position for Tray # The selected paper tray has not been configured for du- Press [JobReset] to change the paper tray settings, or do sin- plex printing. gle-sided printing. # indicates the tray number. For details about the tray settings, see General Settings Guide. Ethernet Board Error An error has occurred in the Ethernet interface. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. Exceeded max. print size. Press FormFeed/JobReset. The page images to be printed Press [JobReset] to change the exceed the maximum print ar- paper tray settings, or press ea. [FormFeed] to print regardless. I/O buffer overflow The maximum size of the I/O Increase the size of the I/O buffer has been exceeded. buffer through the Host Inter- face menu. Load paper in Tray # There is no paper in the select- Load the tray with paper. ed paper tray. # indicates the tray number. NV-RAM Error An error has occurred in the printer. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative. Output Tray changed. The output tray has been changed because of the paper size limitation of the selected tray. Select the correct output tray. 34