Ricoh 402011 Operating Instructions - Page 45

The Printer Function Problem Causes and Solutions It takes a long The data is large or complex so it takes time to process. If the Data In indi- time to complete a cator is blinking, data is being processed. Wait until printing resumes. print job. It takes too much time to resume printing. The data is large or complex so it takes time to process. If the Data In indicator is blinking, data is being processed. Wait until printing resumes. The machine is in Energy Saver mode. To resume from Energy Saver mode, it has to warm up, and this takes time. See General Settings Guide. Paper is not fed from the selected tray. When you are using a Windows operating system, printer driver settings override those set using the control panel. Set the desired input tray using the printer driver. Optional compo- You have to configure the option setup in printer properties when bidirec- nents connected to tional transmission is not enabled. the machine are See the printer driver Help. not recognized when using Win- dows 98SE / Me, Windows 2000 / 5 XP, and Windows Server 2003. Images are printed in the wrong orientation. The feed orientation you selected and the feed orientation selected in the printer driver's option setup might not be the same. Set the machine's feed orientation and the printer driver's feed orientation accordingly. See the printer driver Help. The printed image is different from the image on the computer's display. With certain functions, such as enlargement and reduction, image layout might be different to that on the computer display. Note ❒ If the problem cannot be solved, contact your sales or service representative. 39