Ricoh 402011 Operating Instructions - Page 37

Setting Originals ❖ Originals that can and cannot be placed in the ADF For details about the originals that can and cannot be placed in the ADF, see Copy Reference. Attempting to use originals unsuitable for the ADF can lead to a misfeed and damage to the originals. Place such originals directly on the exposure glass. Important ❒ For details about original sizes that can be detected automatically and notes on placing originals in the ADF, see Copy Reference. A Adjust the original guide to match the size of the originals. B Place the originals with the side to be scanned facing up. For originals which are to be scanned on both sides, the first side should face up. There are two orientations. ❖ When placing the originals so that the top edges touch the back of the ADF ❖ When placing the top edges of the originals first When using the machine as a network TWAIN scanner, this orientation is the standard setting for the TWAIN driver. Normally, use this orientation for placing originals. 4 AAH007S Note ❒ Originals of the same width and different length can be placed at the same time. Place the originals as shown: AAH022S 1. ADF placement orientation 2. Height ❒ Originals are scanned in the inserted order, starting from the topmost page. C Select the original orientation ac- cording to the orientation of the AAH006S placed originals. Reference p.29 "Specifying original orientation and setting originals" 31