Ricoh MP C6502 Manuals - Page 189
When Multiple Functions Cannot Be Executed Simultaneously, then set Multi-sheet Fold to [Off].
View all Ricoh MP C6502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
When You Have Problems Operating the Machine Fold Problem Causes Solutions Wrinkling occurs when gate fold, letter fold-in, or letter fold-out is applied. Wrinkling can occur if gate fold, letter fold-in, or letter fold-out is applied to B4 JIS , A3 , 8 1/2" 14" , 11" 17" , 12" 18" , 8K , or larger sizes of paper. When applying gate fold, letter fold-in, or letter fold-out to paper larger than A4, we recommend you enable image reduction and use paper no larger than A4 . When you print Z-folded paper, the machine indicates that the output tray is full even though the amount of output paper on the tray is less than the stack capacity. The Z-fold support tray is not set. Set the Z-fold support tray for finisher or multi-folding unit. For details about how to add the Z-fold support tray, see "Finishing", Copy/ Document Server . The multi-folding unit outputs sheets with creased edges when gate fold is applied. The paper is curled. Remove the paper, and then reload it upside down. Alternatively, remove the paper, and then reload it in the opposite direction. The position of the fold is incorrect when letter fold-in is applied to a B5 JIS sheet. Multi-sheet fold has been specified when only one sheet is being printed. In [Finishing] on the initial copier screen, under [Folding Unit], select [Letter Fold-in]. Press [Change], and then set "Multi-sheet Fold" to [Off]. For details about how to specify the multisheet fold function, see "Finishing", Copy/Document Server . • If you cannot make copies as you want because of paper type, paper size, or paper capacity problems, use the recommended paper. For details about recommended paper, see page 146 "Recommended Paper Sizes and Types". When Multiple Functions Cannot Be Executed Simultaneously If you are not able to carry out your job, it may be that the machine is being used by another function. Wait until the current job is completed before trying again. In certain cases, you can carry out another job using a different function while the current job is being performed. 179