Ricoh MP C6502 Manuals - Page 78
Copying onto Custom Size Paper from the, Bypass Tray
View all Ricoh MP C6502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
3. Copy Copying onto Custom Size Paper from the Bypass Tray Paper that has a horizontal length of 139.7-487.7 mm (5.50-19.20 inches) and a vertical length of 90.0-330.2 mm (3.55-13.00 inches) can be fed in from the bypass tray. Note however that the limitation on the horizontal and vertical length range will vary depending on which options are installed. • When prints are delivered to the upper tray of Finisher SR4110: Horizontal length: 139.7-487.7 mm (5.50-19.20 inches), vertical length: 100.0-330.2 mm (3.94-13.00 inches) • When prints are delivered to the shift tray of Finisher SR4110: Horizontal length: 139.7-487.7 mm (5.50-19.20 inches), vertical length: 139.0-330.2 mm (5.48-13.00 inches) 1. Load the paper face up in the bypass tray. The bypass tray ( ) is automatically selected. 2. Press the [ ] key. 3. Press [Paper Size]. 4. Press [Custom Size]. 5. Enter the horizontal size with the number keys, and then press [ ]. 6. Enter the vertical size with the number keys, and then press [ ]. 7. Press [OK] twice. 8. Place the originals, and then press the [Start] key. 68