Ricoh MP C6502 Manuals - Page 226
When data cannot be sent because a currently used file is selected, press [Scanned Files
View all Ricoh MP C6502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
10. Troubleshooting Message Causes Solutions "Transmission has failed. Insufficient memory in the destination hard disk. To check the current status, press [Scanned Files Status]." Transmission has failed. There was not enough free space on the hard disk of the SMTP server, FTP server, or client computer at the destination. Allocate sufficient space. "Transmission has failed. To check the current status, press [Scanned Files Status]." While a file was being sent, a network error occurred and the file could not be sent correctly. If the same message appears again after scanning again, the cause could be a mixed network, or else network settings were changed during WSD scanner transmission. For details about network error, contact your administrator. When data cannot be sent because a currently used file is selected Message "Selected file is currently in use. File name cannot be changed." "Selected file is currently in use. Password cannot be changed." "Selected file is currently in use. User name cannot be changed." Causes Solutions You cannot change the name of a file whose status is "Waiting..." or that is being edited with DeskTopBinder. Cancel transmission ("Waiting..." status cleared) or the DeskTopBinder setting, and then change the file name. You cannot change the password of a file whose status is "Waiting..." or that is being edited with DeskTopBinder. Cancel transmission ("Waiting..." status cleared) or the DeskTopBinder setting, and then change the password. You cannot change the sender's name whose status is "Waiting..." or that is being edited with DeskTopBinder. Cancel transmission ("Waiting..." status cleared) or the DeskTopBinder setting, and then change the user name. 216