Sony MZ-N707 Operating Instructions - Page 74

Error message Meaning/Remedy NO SIGNAL • The recorder could not detect digital input signals. , Make sure that the source is connected firmly (page 19). P/B ONLY • You tried to record or edit on a pre mastered MD (P/B stands for "playback"). , Insert a recordable MD. PROTECTED • You tried to record or edit on a MD with the tab in the record-protect position. , Slide the tab back (page 61). REC ERR • Recording was not correctly done. , Place the recorder at a place with no vibrations and record again. • The disc is soiled with an oil film or finger prints, is scratched, or is not a standard disc. , Try recording again with another disc. READ ERR • The recorder cannot read the disc information correctly. , Reinsert the disc. SORRY • You tried to erase the track mark at the beginning of the first track. • You tried to erase a track mark to combine tracks the recorder cannot combine (a track recorded in stereo and in mono, for example). • You tried to overwrite a track marks. • You tried to press X or T MARK during synchro-recording. • You tried to turn on group function while programming. , Turn the group function on before programming. TEMP OVER • Heat has built up in the recorder. , Let the recorder cool down. TOC Edit • The MD player is recording information (track start and end position) from the memory to the disk. , Wait until this process is completed. Do not expose the player to physical shock, nor disrupt power supply. TOC ERR • The recorder cannot read the disc information correctly. , Insert another disc. , If it is no problem to erase all the contents of the disc, erase all (page 55). TR FULL • Track number 254 has been reached. , Erase unnecessary tracks (page 55). TrPROTECT • You tried to record or edit on a track that is protected from erasing. , Record or edit on other tracks. • You tried to edit a track that has been checked out from a computer. , Check the track back in to the computer and then edit. 74-GB