TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 112
power inline supply, power inline profile
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Configure the PoE priority as "low" for port 2: TL-SG2424P(config)# interface gigabitEthernet 1/0/2 TL-SG2424P(config-if)# power inline priority low power inline supply Description The power inline supply command is used to configure the PoE status of the corresponding port. Syntax power inline supply { enable | disable } Parameter enable | disable -- The PoE status of the port. By default, the PoE status is "enable". Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Enable the PoE feature for port 2: TL-SG2424P(config)# interface gigabitEthernet 1/0/2 TL-SG2424P(config-if)# power inline supply enable power inline profile Description The power inline profile command is used to bind a PoE profile to the corresponding port. To cancel the bind relation, please use no power inline profile command. Syntax power inline profile name no power inline profile 102