TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 139
ip igmp snooping filter maxgroup, ip igmp snooping filter mode
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Syntax ip igmp snooping filter no ip igmp snooping filter Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Enable IGMP Snooping filter function for port 3: TL-SG2424P(config)# interface gigabitEthernet 1/0/3 TL-SG2424P(config-if)# ip igmp snooping filter ip igmp snooping filter maxgroup Description The ip igmp snooping filter maxgroup command is used to specify the maximum number of multicast groups for a port to join in. Syntax ip igmp snooping filter maxgroup maxgroup Parameter maxgroup ii The maximum number of multicast groups for a port to join in. It is used to prevent some ports taking up too much bandwidth. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Specify the maximum number of multicast groups for ports 2-5 to join in as 10: TL-SG2424P(config)# interface range gigabitEthernet 1/0/2-5 TL-SG2424P(config-if-range)# ip igmp snooping filter maxgroup 10 ip igmp snooping filter mode Description The ip igmp snooping filter mode command is used to configure the Action mode for the desired port. 129