TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 77
description, shutdown, User Guidelines, Example, Syntax, Parameter, Command Mode
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
User Guidelines Command in the Interface Range gigabitEthernet Mode is executed independently on all ports in the range. It does not effect the execution on the other ports at all if the command results in an error on one port. Example To enter the Interface range gigabitEthernet Configuration Mode, and configure ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one port-list: TL-SG2424P(config)# interface range gigabitEthernet 1/0/1-3,1/0/6-7,1/0/9 description Description The description command is used to add a description to the Ethernet port. To clear the description of the corresponding port, please use no description command. Syntax description string no description Parameter string ii Content of a port description, ranging from 1 to 16 characters. Command Mode Interface Configuration Mode (interface gigabitEthernet) Example Add a description "Port #5" to port 5: TL-SG2424P(config)# interface gigabitEthernet 1/0/5 TL-SG2424P(config-if)# description Port#5 shutdown Description The shutdown command is used to disable an Ethernet port. To enable this port again, please use no shutdown command. Syntax shutdown no shutdown 67