TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 45
logging file flash, clear logging
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
logging file flash Description The logging file flash command is used to configure the level and the status of the log file input. To restore to the default configuration, please use no logging file flash command. The log file indicates the flash sector for saving system log. The information in the log file will not be lost after the switch is restarted and can be got by the show logging flash command. Syntax logging file flash level no logging file flash Parameter level -- Severity level of the log information output to each channel. There are 8 severity levels marked with values 0-7. The smaller value has the higher priority. Only the log with the same or smaller severity level value will be output. By default, it is 4 indicating that the log information marked with 0~4 will be saved in the log buffer. Command Mode Global Configuration Mode Example Enable the log file function and set the severity as 7: TL-SG2424P(config)# logging file flash 7 clear logging Description The clear logging command is used to clear the information in the log buffer and log file. Syntax clear logging [ buffer | flash ] Parameter buffer | flash -The output channels: buffer and flash. Clear the information of the two channels, by default. 35