TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 23
switchport access vlan
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Syntax switchport mode { access | trunk | general } Parameter access | trunk | general -- Link Types. There are three Link Types for the ports. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Specify the Link Type of port 3 as trunk: TL-SG2424P(config)# interface gigabitEthernet 1/0/3 TL-SG2424P(config-if)# switchport mode trunk switchport access vlan Description The switchport access vlan command is used to add the desired Access port to IEEE 802.1Q VLAN. To remove the specified port/ports from the corresponding VLAN, please use no switchport access vlan command. Syntax switchport access vlan vlan-id no switchport access vlan Parameter vlan-id -- Specify IEEE 802.1Q VLAN ID, ranging from 2 to 4094. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Specify the Link Type of port 3 as access and add it to VLAN 2: TL-SG2424P(config)# interface gigabitEthernet 1/0/3 TL-SG2424P(config-if)# switchport mode access TL-SG2424P(config-if)# switchport access vlan 2 13