TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 72

tracert

Get TP-Link TL-SG2424P PDF manuals and user guides View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

The ping command is used to test the connectivity between the switch and one node of the network. Syntax ping { ip_addr } [ -n count ] [ -l count ] [ -i count ] Parameter ip_addr ii The IP address of the destination node for ping test. -n count ii The amount of times to send test data during Ping testing. It ranges from 1 to 10. By default, this value is 4. -l count ii The size of the sending data during ping testing. It ranges from 1 to 1024 bytes. By default, this value is 64. -i count ii The interval to send ICMP request packets. It ranges from 100 to 1000 milliseconds. By default, this value is 1000. Command Mode User EXEC Mode and Privileged EXEC Mode Example To test the connectivity between the switch and the network device with the IP 192.168.0.131, please specify the count (-l) as 512 bytes and count (-i) as 1000 milliseconds. If there is not any response after 8 times' Ping test, the connection between the switch and the network device is failed to establish: TL-SG2424P# ping 192.168.0.131 -n 8 -l 512 tracert Description The tracert command is used to test the connectivity of the gateways during its journey from the source to destination of the test data. Syntax tracert url [ maxHops ] Parameter url ii The IP address of the destination device. maxHops ii The maximum number of the route hops the test data can pass though. It ranges from 1 to 30. By default, this value is 4. Command Mode User EXEC Mode and Privileged EXEC Mode 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
62
The
ping
command is used to test the connectivity between the switch and one
node of the network.
Syntax
ping
{
ip_addr
} [
-n
count
] [
-l
count
] [
-i
count
]
Parameter
ip_addr
——
The IP address of the destination node for ping test.
-n
count
——
The amount of times to send test data during Ping testing. It
ranges from 1 to 10. By default, this value is 4.
-l
count
——
The size of the sending data during ping testing. It ranges from 1
to 1024 bytes. By default, this value is 64.
-i
count
——
The interval to send ICMP request packets. It ranges from 100 to
1000 milliseconds. By default, this value is 1000.
Command Mode
User EXEC Mode and Privileged EXEC Mode
Example
To test the connectivity between the switch and the network device with the IP
192.168.0.131, please specify the
count
(-l) as 512 bytes and
count
(-i) as 1000
milliseconds. If there is not any response after 8 times’ Ping test, the connection
between the switch and the network device is failed to establish:
TL-SG2424P# ping
192.168.0.131
–n
8
–l
512
tracert
Description
The
tracert
command is used to test the connectivity of the gateways during its
journey from the source to destination of the test data.
Syntax
tracert
url
[
maxHops
]
Parameter
url
——
The IP address of the destination device.
maxHops
——
The maximum number of the route hops the test data can pass
though. It ranges from 1 to 30. By default, this value is 4.
Command Mode
User EXEC Mode and Privileged EXEC Mode