TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 16
Security Levels, 1.4 Conventions, 1.4.1 Format Conventions
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
a). Interface gigabitEthernet: Configure parameters for an Ethernet port, such as Duplex-mode, flow control status. b). Interface range gigabitEthernet: The commands contained are the same as that of the Interface Ethernet. Configure parameters for several Ethernet ports. c). Interface link-aggregation: Configure parameters for a link-aggregation, such as broadcast storm. d). Interface range link-aggregation: Configure parameters for multi-trunks. e). Interface vlan: Configure parameters for the vlan-port. Vlan Configuration Mode: In this mode, users can create a VLAN and add a specified port to the VLAN. 3. Some commands are global, that means they can be performed in all modes: show: Displays all information of switch, for example: statistic information, port information, VLAN information. history: Displays the commands history. 1.3 Security Levels This switch's security is divided into two levels: User level and Admin level. User level only allows users to do some simple operations in User EXEC Mode; Admin level allows you to monitor, configure and manage the switch in Privileged EXEC Mode, Global Configuration Mode, Interface Configuration Mode and VLAN Configuration Mode. Users get the privilege to the User level once logging in by Telnet. However, Guest users are restricted to access the CLI. Users can enter Privileged EXEC mode from User EXEC mode by using the enable command. 1.4 Conventions 1.4.1 Format Conventions The following conventions are used in this Guide: Items in square brackets [ ] are optional Items in braces { } are required Alternative items are grouped in braces and separated by vertical bars. For example: speed {10 | 100 | 1000 } 6