TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 25
switchport pvid, show vlan summary, Command Mode, Example, Description, Syntax, Parameter
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
tagged | untagged -- Egress rule, untagged or tagged. Tagged: All packets forwarded by the port are tagged. The packets contain VLAN information. Untagged: Packets forwarded by the port are untagged. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Specify the Link Type of port 4 as "general", then add it to VLAN 2 and configure the egress rule of port 4 as "tagged": TL-SG2424P(config)# interface gigabitEthernet 1/0/4 TL-SG2424P(config-if)# switchport mode general TL-SG2424P(config-if)# switchport general allowed vlan 2 tagged switchport pvid Description The switchport pvid command is used to configure the PVID for the switch ports. Syntax switchport pvid vlan-id Parameter vlan-id -- Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Specify the PVID of port 3 as 1: TL-SG2424P(config)# interface gigabitEthernet 1/0/3 TL-SG2424P(config-if)# switchport pvid 1 show vlan summary Description The show vlan summary command is used to display the summarized information of IEEE 802.1Q VLAN. 15