TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 35
lacp port-priority, show etherchannel
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Command Mode Global Configuration Mode Example Configure the LACP system priority as 1024 globally: TL-SG2424P(config)# lacp system-priority 1024 lacp port-priority Description The lacp port-priority command is used to configure the LACP port priority for specified ports. To return to the default configurations, please use no lacp port-priority command. Syntax lacp port-priority pri no lacp port-priority Parameter pri ii The port priority, ranging from 0 to 65535. It is 32768 by default. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Example Configure the LACP port priority as 1024 for ports 1-3: TL-SG2424P(config)# interface range gigabitEthernet 1/0/1-3 TL-SG2424P(config-if-range)# lacp port-priority 1024 Configure the LACP port priority as 2048 for port 4: TL-SG2424P(config)# interface gigabitEthernet 1/0/4 TL-SG2424P(config-if)# lacp port-priority 2048 show etherchannel Description The show etherchannel command is used to display the EtherChannel information. 25