TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 22
name, switchport mode, Syntax, Parameter, Command Mode, Example, Description
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Syntax interface vlan vlan-id no interface vlan vlan-id Parameter vlan-id -- Specify IEEE 802.1Q VLAN ID, ranging from 1 to 4094. Command Mode Global Configuration Mode Example Create VLAN Interface 2: TL-SG2424P(config)# interface vlan 2 name Description The name command is used to assign a description to a VLAN. To clear the description, please use no name command. Syntax name descript no name Parameter descript --String to describe the VLAN, which contains 16 characters at most. Command Mode VLAN Configuration Mode (VLAN) Example Specify the name of VLAN 2 as "group1": TL-SG2424P(config)# vlan 2 TL-SG2424P(config-vlan)# name group1 switchport mode Description The switchport mode command is used to configure the Link Type for the ports. 12