TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 145

mib-oid ii MIB Object ID. It is the Object Identifier (OID) for the entry of View, ranging from 1 to 61 characters. include | exclude ii View Type, with include and exclude options. They represent the view entry can/cannot be managed by the SNMP management station individually. Command Mode Global Configuration Mode Example Add a View named view1, configuring the OID as 1.3.6.1.6.3.20, and this OID can be managed by the SNMP management station: TL-SG2424P(config)# snmp-server view view1 1.3.6.1.6.3.20 include snmp-server group Description The snmp-server group command is used to manage and configure the SNMP group. To delete the corresponding SNMP group, please use no snmp-server group command. SNMP v3 provides the VACM (View-based Access Control Model) and USM (User-Based Security Model) mechanisms for authentication. The users in the SNMP Group can manage the device via the Read View, Write View and Notify View. And the authentication mode and the privacy mode guarantee the high security for the communication between the management station and the managed device. Syntax snmp-server group name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv | authPriv }] [ read read-view ] [ write write-view ] [ notify notify-view ] no snmp-server group name smode { v1 | v2c | v3 } slev { noAuthNoPriv | authNoPriv | authPriv } Parameter name iiThe SNMP Group name, ranging from 1 to 16 characters. The Group Name, Security Model and Security Level compose the identifier of the SNMP Group. These three items of the Users in one group should be the same. smode ii Security Model, with v1av2c and v3 options. They represent SNMP v1, SNMP v2c and SNMP v3. slev ii The Security Level of SNMP v3 Group. There are three options, including noAuthNoPriv čno authorization and no encryptionĎaauthNoPriv čauthorization and no encryptionĎ and authPrivčauthorization and encryptionĎ. 135