TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 85
show interface configuration, show storm-control
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
show interface configuration Description The show interface configuration command is used to display the configurations of all ports or an Ethernet port, including Port-status, Flow Control, Negotiation Mode and Port-description. Syntax show interface [ gigabitEthernet port ] configuration Parameter port ii The Ethernet port number. Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the configurations of all Ethernet ports: TL-SG2424P(config)# show interface configuration Display the configurations of port 2: TL-SG2424P(config)# show interface gigabitEthernet 1/0/2 configuration show storm-control Description The show storm-control command is used to display the storm-control information of Ethernet ports. Syntax show storm-control [ interface { gigabitEthernet port | range gigabitEthernet port-list }] Parameter port ii The Ethernet port number. port-list ii The list of Ethernet ports. Command Mode Privileged EXEC Mode and Any Configuration Mode Example Display the storm-control information of port 4, 5, 6, and 7: 75