TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 148
snmp-server community, snmp-server host
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
snmp-server community Description The snmp-server community command is used to add Community. To delete the corresponding Community, please use no snmp-server community command. SNMP v1 and SNMP v2c adopt community name authentication. The community name can limit access to the SNMP agent from SNMP network management station, functioning as a password. Syntax snmp-server community name { read-only | read-write } mib-view no snmp-server community name Parameter name ii Community Name, ranging from 1 to 16 characters. read-only | read-write ii The access rights of the community, with read-only and read-write options. mib-view ii The MIB View for the community to access. Command Mode Global Configuration Mode Example Add community public, and the community has read-write management right to View viewDefault: TL-SG2424P(config)# snmp-server community public read-write viewDefault snmp-server host Description The snmp-server host command is used to add Notification. To delete the corresponding Notification, please use no snmp-server host command. Syntax snmp-server host ip udp-port user-name [ smode { v1 | v2c | v3 }] [ slev { noAuthNoPriv | authNoPriv | authPriv }] [ type { trap | inform }] [ retries retries ] [ timeout timeout ] no snmp-server host ip user-name Parameter ip ii The IP Address of the management Host. 138