TP-Link TL-SG2424P TL-SG2424P V1 CLI Reference Guide - Page 126
spanning-tree max-hops, spanning-tree bpdufilter
View all TP-Link TL-SG2424P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
TL-SG2424P(config)# spanning-tree hold-count 8 spanning-tree max-hops Description The spanning-tree max-hops command is used to configure the maximum number of hops that occur in a specific region before the BPDU is discarded. To return to the default configurations, please use no spanning-tree max-hops command. Syntax spanning-tree max-hops value no spanning-tree max-hops Parameter value ii The maximum number of hops that occur in a specific region before the BPDU is discarded, ranging from 1 to 40 in hop. By default, it is 20. Command Mode Global Configuration Mode Example Configure the max-hops of STP as 30: TL-SG2424P(config)# spanning-tree max-hops 30 spanning-tree bpdufilter Description The spanning-tree bpdufilter command is used to enable the BPDU filter function for a port. With the function enabled, the port can be prevented from receiving and sending any BPDU packets. To disable the BPDU filter function, please use no spanning-tree bpdufilter command. Syntax spanning-tree bpdufilter no spanning-tree bpdufilter Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) 116