TRENDnet TEW-453APB User Guide - Page 40

Wireless Screens, Basic Settings Screen - 108mbps

Page 40 highlights

Access Point Setup Wireless Screens There are two (2) configuration screens available: • Basic Settings • Advanced Basic Settings Screen The settings on this screen must match the settings used by Wireless Stations. Click Basic on the menu to view a screen like the following. Figure 21: Basic Settings Screen Data - Basic Settings Screen Operation Wireless Mode Select the desired option: • Disable - select this if for some reason you do not this AP to transmit or receive at all. • 802.11b and 802.11g - this is the default, and will allow connections by both 802.11b and 802.1g wireless stations. • 802.11b - if selected, only 802.11b connections are allowed. 802.11g wireless stations will only be able to connect if they are fully backward-compatible with the 802.11b standard. • 802.11g - only 802.11g connections are allowed. If you only have 802.11g, selecting this option may provide a performance improvement over using the default setting. • Dynamic Super 802.11g (108Mbps) - This uses Packet Bursting, FastFrame, Compression, and Channel Bonding (using 2 channels) to increase throughput. Only clients supporting the "Atheros 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115

Access Point Setup
Wireless Screens
There are two (2) configuration screens available:
Basic Settings
Advanced
Basic Settings Screen
The settings on this screen must match the settings used by Wireless Stations.
Click
Basic
on the menu to view a screen like the following.
Figure 21: Basic Settings Screen
Data - Basic Settings Screen
Operation
Wireless Mode
Select the desired option:
Disable
- select this if for some reason you do not this AP to
transmit or receive at all.
802.11b and 802.11g
- this is the default, and will allow connec-
tions by both 802.11b and 802.1g wireless stations.
802.11b
- if selected, only 802.11b connections are allowed.
802.11g wireless stations will only be able to connect if they are
fully backward-compatible with the 802.11b standard.
802.11g
- only 802.11g connections are allowed. If you only have
802.11g, selecting this option may provide a performance im-
provement over using the default setting.
Dynamic Super 802.11g (108Mbps)
- This uses
Packet Bursting
,
FastFrame
,
Compression
, and
Channel Bonding
(using 2 chan-
nels) to increase throughput. Only clients supporting the "Atheros
37