TRENDnet TEW-453APB User Guide - Page 80
SNMP, Management, SNMP Screen, Enable SNMP, Community, Access Rights, Any Station
UPC - 710931502732
View all TRENDnet TEW-453APB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Access Point Management SNMP SNMP (Simple Network Management Protocol) is only useful if you have a SNMP program on your PC. To reach this screen, select SNMP in the Management section of the menu. Figure 59: SNMP Screen Data - SNMP Screen General Enable SNMP Use this to enable or disable SNMP as required Community Enter the community string, usually either "Public" or "Private". Access Rights Select the desired option: • Read-only - Data can be read, but not changed. • Read/Write - Data can be read, and setting changed. Managers Any Station The IP address of the manager station is not checked. Only this station The IP address is checked, and must match the address you enter in the IP address field provided. If selected, you must enter the IP address of the required station. Traps Disable Traps are not used. Broadcast Select this to have Traps broadcast on your network. This makes them available to any PC. Send to Select this to have Trap messages sent to the specified PC only. If selected, you must enter the IP Address of the desired PC. Trap version Select the desired option, as supported by your SNMP Management program. 77