TRENDnet TEW-453APB User Guide - Page 75
Check for Firmware, FTP Server address
UPC - 710931502732
View all TRENDnet TEW-453APB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Wireless Access Point User Guide Provide login name and password Provide "Respond to Auto-configuration" setting Auto Update Check for Firmware upgrade Install... FTP Server address Firmware pathname FTP Login Name FTP Password If enabled, the login name and password on this AP is supplied the AP making the Auto-configuration request. If disabled, the AP making the Auto-configuration request will keep its existing login name and password. If enabled, the "Respond to Auto-configuration" setting on this AP is supplied to the AP making the Auto-configuration request. If disabled, the AP making the Auto-configuration request will keep its existing setting. If enabled, this AP will check to see if a Firmware (FW) upgrade is available on the specified FTP Server. If enabled: • Enter the desired time interval (in days) between checks. • Select the desired option for installation (see next item). • Provide the FTP server information. Select the desired option: • Install FW if different version found If selected, then if the firmware file at the specified location is different to the current installed version, the FW will be installed. This allows "Downgrades" - installing an older version of the FW to replace the current version. • Install later version only If selected, then the firmware file at the specified location will only be installed if it is a later version. Enter the address (domain name or IP address) of the FTP Server. Enter the full path (including the FW filename) to the the FW file on the FTP Server. Enter the login name required to gain access to the FTP Server. Enter the password for the login name above. 72