TRENDnet TN-200 User's Guide - Page 54

TRENDnet User's Guide TN‐200 / TN‐200T1 Power Configure the Disk Hibernation, Fan Control, Power Recovery, and Power On/Off Schedule from this location. Disk Hibernation Click the checkbox to Enable Disk Hibernation. Disk Hibernation turns off the hard drive(s) according to the settings you make in this field. Firmware Upgrade allows you to upgrade the firmware. Under this subheading, you can see the Firmware version number, the Firmware date, and a field in which you can install the Firmware upgrade files. Click Browse to locate the new firmware. Select the firmware and click OK. Then click the Install button to install the new firmware. Fan Control Use this feature to select Auto Fan Control or Full Speed (Note: speeding up your fans will not improve the overall speed of the NAS). Click the radio button next to the option that you prefer. The Time Out function allows the NAS to remain idle for a specific period of time. You can configure the NAS to remain active for the duration of the Time Out feature. Enter the duration (in minutes) and click Save to continue. The NAS will remain active for the duration of your settings. Power Recovery Should the TN‐200 / TN‐200T1 fail for any reason, this feature allows it to recover some power. Click the checkbox next to Enable to activate Power Recovery. © Copyright 2013 TRENDnet. All Rights Reserved. 52