Toshiba Tecra 9100 User Guide - Page 59
Using a mouse, Setting up a PS/2 mouse with the AccuPoint II
View all Toshiba Tecra 9100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Connecting Other External Devices Using a mouse 59 Using a mouse You may want to use a mouse instead of the computer's built-in pointing device, the AccuPoint II. You can use a serial mouse or a PS/2-compatible mouse. A serial mouse disables the AccuPoint II. A PS/2-compatible mouse allows you to have the AccuPoint II active at the same time. Setting up a PS/2 mouse with the AccuPoint II When you connect a PS/2-compatible mouse to the PS/2 port, you may use the mouse, the AccuPoint II, or both. CAUTION: When connecting any PS/2 device, turn off your computer to prevent any possible hardware damage. NOTE: If you connect a PS/2 mouse to the computer while it is in Standby mode, you will not be able to use the mouse when you turn the computer on. NOTE: It is recommended that the Control Panel window be set to Classic View to access the Toshiba HW Setup icon. To set the PS/2 mouse to work simultaneously with the AccuPoint II: 1 Click Start, then Control Panel. 2 Double-click the Toshiba Hardware Setup icon. 3 Select the Pointing Devices tab, then click Simultaneous.